Where the beef market sits in late 2026
MLA's Australian Cattle Industry Projections, September 2026 update, forecast beef production of about 3.01 million tonnes carcase weight in 2026, or about 3.02 million tonnes including veal. The 21 September news release calls that a national record, above 3 million tonnes carcase weight. Adult cattle slaughter is forecast at 9.6 million head, and annual feedlot turn-off is forecast to exceed four million head for the first time in 2025-26.
That volume is not all heading to local burger lines. The same news release forecasts beef exports of about 2.4 million tonnes in 2026. In the projections table that lines up with carcase weight, about 2.42 million tonnes. Shipped weight in the same table is about 1.65 million tonnes. Production above is also carcase weight, so the 2.4 million tonne export line is not a shipped-weight share of the crop.
The forward view is tighter. MLA's 21 September release has slaughter easing to 9.2 million head in 2027 and 8.8 million in 2028. The projections table puts the national herd at 30.8 million head at 30 June 2026, easing to 29.7 million by 30 June 2028. MLA says heavier carcases, with an average cattle carcase weight of 313 kg forecast for 2026, will do more of the work of holding production up as slaughter eases.
Spring rain has tightened near-term supply. Beef Central reported on 20 October 2026 that rain had reduced vendor interest, that saleyard numbers in Queensland had retracted, and that some sales were cancelled. The same report said some producers with solid rain may hold cattle to add weight, and that the 2026 season for many large northern operators was expected to finish in the week ending 18 December, weather permitting.
Why patty buyers feel export markets first
QSR beef patties are commonly made from manufacturing beef: boneless cow, bull and lean trim, ground and blended to a target fat level. The United States buys the same type of product for its own burger trade.
- United States. MLA's September projections say the US cattle herd was at its lowest level in 75 years at the start of 2026. The 21 September news release says the herd is at its lowest in more than 75 years. DAFF says Australian exporters can ship up to 449,909 tonnes of beef to the United States at zero tariff in calendar 2026, made up of a 378,214 tonne WTO quota and a 71,695 tonne entitlement under the Australia-United States Free Trade Agreement. Volumes above that combined amount can face a safeguard if the conditions in that agreement are met. Steiner Consulting's report for MLA on 16 October 2026, using USDA figures, put US imports of Australian beef and beef offal at 410,366 tonnes year to date, about 15% above 355,854 tonnes a year earlier.
- The US market this month. The same 16 October report said ample South American supply, higher US cow slaughter and slowing US QSR demand were weighing on the near-term imported beef market, and that 2027 offerings were more limited than nearby supply.
- China. China's beef safeguard took effect on 1 January 2026 as a country quota with an extra tariff on volume above the quota. Xinhua, citing China's Ministry of Commerce, reported that Australian beef imports reached 100% of the country quantity on 18 June 2026, and that an additional 55% tariff, on top of the rate already applying, took effect from midnight on 20 June 2026. The Australian Meat Industry Council and MLA put that 2026 quantity at 205,000 tonnes. The additional 55% applies to beef above the quota for the rest of the quota year. It is not a tariff on all Australian beef. The quota is annual. Trade and Investment Queensland's summary of the measure puts Australia's 2027 quantity at 209,000 tonnes. MLA's September update says that once the 2026 quota was reached, many exporters redirected product to other markets.
- New Zealand. US Customs and Border Protection Quota Bulletin 26-201 sets New Zealand's 2026 US beef quota at 213,402 tonnes. That is a separate quota from Australia's access above.
A local production record does not, on its own, describe the manufacturing beef available to a domestic patty plant. Domestic buyers are competing with export demand for lean beef, and MLA's slaughter forecast for 2027 is lower than 2026.
What sits behind a patty brief
When a supplier changes a patty offer, these are usually the levers behind it:
- Lean beef grade. 90CL and cow beef are the usual manufacturing benchmarks.
- Fat blend. A tighter fat tolerance gives more consistent cooking and yield.
- Exchange rate. MLA's September update named a stronger Australian dollar as a headwind for exporters.
- Plant capacity and timing. Seasonal shutdowns and rain-affected supply change availability.
- Freight, packaging and cold storage. These sit outside the cattle market.
A beef patty specification checklist
A written specification is the practical control against quality drift when supply tightens. Cover at least these points.
Raw material and composition
- Beef cuts allowed (for example cow or bull boneless, or trim), origin, and any claims such as grass fed, halal or "100% beef".
- Fat target and tolerance, and how chemical lean is tested and reported per batch.
- Grind plate size, whether the patty is seasoned, and the full ingredient list if any seasoning or binder is used, with allergens declared.
Format
- Raw weight, diameter and thickness, with tolerances.
- Cooked yield or shrink target on your own grill at your own settings.
- Frozen format (individually quick frozen or plate frozen), interleave paper, patties per stack and per carton, carton labelling and pallet configuration.
- Shelf life frozen and maximum storage temperature.
Food safety and quality
- The plant's food-safety plan, third-party certification and plant approvals. Those documents belong to the factory. Shiiv Imports holds ISO 9001.
- Microbiological criteria and pathogen testing frequency, with certificates of analysis per batch.
- Foreign matter controls such as metal detection or X-ray, and bone fragment limits.
- A cooking validation. The Food Safety Information Council advises cooking hamburgers and minced beef to 75°C in the centre. FSANZ gives the same 75°C centre temperature for minced meat and hamburgers. Confirm your grill time and temperature reach that across the full patty size range.
- Traceability to plant and production date, and a recall contact.
Claims on your menu
Restaurants, cafes and takeaways are exempt from the Country of Origin Food Labelling Standard. The ACCC is clear that any origin claim a business does make must be true, accurate and based on reasonable grounds. If your menu says "Australian beef" or "100% beef", hold supplier declarations that back it up and update them if the plant or blend changes.
Can you import beef patties into Australia?
Sometimes, and it is not a quick switch. Two layers apply, and both have to be current for the exact product.
- Food safety (BSE). FSANZ says beef and beef products can come only from countries it has assessed as Category 1 or 2, subject to certification. The published Category 1 list includes New Zealand, the United States, Canada, Brazil, Argentina and Japan, among others. Check the current list. Category status is not the same as a biosecurity approval for fresh beef.
- Biosecurity. DAFF sets import conditions, permits and certification by country and product type, in BICON. Industry advice 245-2025, dated 29 July 2025, says fresh chilled or frozen beef from the United States and Canada needs an import permit. The related biosecurity advice of 24 July 2025 supports US beef from cattle born and raised in Canada, and from feeder and breeder cattle born and raised in Mexico, when those cattle were legally imported and slaughtered in the United States. It does not open every Mexican cattle pathway. Check the current BICON case before you brief a factory.
Each imported line needs the current conditions, a permit where one is required, and its own label and testing plan.
Buying tips for the months ahead
- Lock in cover for December and January. Beef Central reported on 20 October 2026 that many large northern plants expected to finish the 2026 season in the week ending 18 December, weather permitting. Confirm production slots and frozen stock before those closures.
- Approve a second plant. Do the trials and cook tests now. Factory food-safety documents belong to the factory. Shiiv Imports holds ISO 9001.
- Fix the blend in the specification. Write the fat target, the chemical lean test and the tolerance into the brief, so a blend change is a documented change.
- Check freezer capacity. Extra cover only helps if stores and distribution centres can hold it.
- Keep claims current. Re-check origin and "100% beef" declarations whenever a supplier changes plant or blend.
Our take
Australia is forecast to produce a record volume of beef in 2026, and export markets are competing for the lean beef used in patties. Slaughter is forecast to ease in 2027, China's annual quota applies again in January, and many northern plants are heading for a mid-December finish. A written specification, more than one approved plant and stock planned around that shutdown are the practical preparation.
QSR Supplier sources frozen patties to a buyer's brief. It does not supply fresh beef. A factory makes the patties and Shiiv imports them. Shiiv Imports holds ISO 9001. See the frozen chips and patties supplier page, what we source, and the guides to burger pickles and sliced gherkins, tomato paste for QSR and chicken and egg supply under H5 bird flu. To put a patty specification to market, send a chain brief or talk to our team.
Frequently asked questions
Is there a beef shortage in Australia in 2026?
No. MLA's September 2026 projections forecast beef production of about 3.01 million tonnes carcase weight in 2026, which its 21 September release calls a record above 3 million tonnes. The task for QSR buyers is competition for lean manufacturing beef from export markets, not a lack of Australian volume.
Will beef patty prices go up in 2027?
This guide does not forecast patty prices. MLA expects adult cattle slaughter to ease from 9.6 million head in 2026 to about 9.2 million in 2027, and China's annual beef quota applies again from January 2027. Suppliers set their own patty prices.
What is 90CL beef?
90CL means 90% chemical lean, so the beef is about 10% fat. It is a benchmark grade of boneless manufacturing beef that is blended with fattier trim to make burger patties.
What temperature should a beef patty be cooked to?
The Food Safety Information Council, and FSANZ, advise cooking hamburgers and minced beef to 75°C in the centre, checked with a probe thermometer in the thickest part. QSR operators should validate grill settings against the full range of patty sizes they use.
Can a QSR import frozen beef patties into Australia?
In some cases. The beef must come from a country FSANZ has assessed as BSE Category 1 or 2, and fresh product must also meet DAFF biosecurity conditions, including an import permit where one is required. Check the current BICON case and the FSANZ country list before sourcing.
Does a takeaway menu have to show where its beef comes from?
Restaurants, cafes and takeaways are exempt from the Country of Origin Food Labelling Standard. If you make an origin claim such as "Australian beef", the ACCC requires it to be true, accurate and based on reasonable grounds, so keep supplier evidence on file.
Sources
- Meat & Livestock Australia, beef production forecast, 21 September 2026
- Meat & Livestock Australia, Australian Cattle Industry Projections, September 2026 update
- Steiner Consulting for MLA, weekly US imported beef market report, 16 October 2026
- DAFF, United States beef arrangements
- US Customs and Border Protection, Quota Bulletin 26-201 2026 Beef
- Xinhua, additional 55% tariff on Australian beef from 20 June 2026, citing China's Ministry of Commerce
- Australian Meat Industry Council, Australia fills its China beef safeguard quota, June 2026
- Trade and Investment Queensland, China's beef safeguard measures
- Beef Central, weekly kill, 20 October 2026
- FSANZ, status of country BSE food safety risk assessments
- DAFF, industry advice 245-2025, 29 July 2025
- DAFF, biosecurity advice 2025-A04, 24 July 2025
- Food Safety Information Council, safe cooking temperatures
- FSANZ, food safety basics, cooking temperatures
- ACCC, country of origin food labelling
This guide summarises public industry, regulator, government and news information current at 22 October 2026. Cattle and beef markets move weekly, so check MLA's projections and market reports for the latest figures. It is general information, not legal, biosecurity, food safety or trade advice. Confirm requirements with the relevant authorities, your food safety adviser and your suppliers.